China manufacturer Factory Direct China Power Coating Mould CZPT Parts Manufacturers with Hot selling

Product Description

 

Product Description

Material Silicone/ Rubber
Shape Customized shape
Color Customized color (Pantone color)
Hardness Shore 30-90 or as ordered
Minimum order Small orders can be accepted
Lead time 3- 6 weeks after getting the mould design confirmation
Drawing format .stp / .step / .igs /.CZPT /.dwg / .pdf
Surface treatment Matte, Common polishing, Mirror polishing, Texture, Laser Engraving, Power Coating (Painting), Printing, Segmented colors, Mixedcolors, etc.
Application Automotive, Machinery, Bathroom Facilities, Medical,Household Electrical Appliances etc.
Performance High/low temperature-resistant, wearing-resistant, high tensile strength, all available
Mould material No. 50 steel, No. 45 steel, P20, 8407, H13, 718H, etc.
Mould life 100-500K shots
Mould testing All of the moulds can be well tested before the shipments. Videos for moulds trial running are available.
Inspection 100% inspection by QC, QA before shipping.
After sales service Available by our staff with more than 10 years of working experience in this field

 

Product Show

Material Operating Temperature Range Advantage

Silicone

(MQ/MVQ/MPQ)

about -40~200ºC

Heat resistance

Compression set resistance

Ozone resistance

Food grade compliant

Medical grade compliant

EPDM about -50~150ºC

Water resistance

Weather resistance

Ozone resistance

Chemical resistance

NBR about -30~100ºC

Oil resistance

Water resistance

Good air tightness

Wear resistance

NR about -60~80ºC

Wear resistance

Good elasticity

Good tensile strength

Good elongation

SBR about -50~100ºC

Water resistance

Wear resistance

Weather resistance

FKM/FPM about -20~200ºC

Heat resistance

Oil resistance

Chemical resistance

CR about -45~100ºC

Good solvent resistance

Wear resistance

Oil resistance

Good air tightness

 
 

Manufacturing Ability

Silicone & Rubber Parts

Share silicone rubber parts quote within 24 hours.

 

We have NR, EPDM, NBR, CR, Silicone, and other material product formula design and production experience.
 

Silicone rubber parts for a variety of scenarios.

CNC Machining Part

100% inspection before shipment.

Provide sandblasting and laser engraving surface finish on CNC machining parts. Small orders can be accepted.

 

Aluminum, Stainlesss steel, Brass, Plastic, etc.

Injection Moulding Production

Single color injection and double-color injection molding service.

100-500T machines, small order accepted.

 

ABS, PC clear, TPU, Nylon, PC+TPU etc.

 

Our Service

ScHangZhou & 3D drawing can make a 3D drawing through scHangZhou machine with sample
CNC Machining prototype ABS, PC, Nylon, good strength, same material features as injection parts
SLA & 3D print prototype cost effective for part show or design test
Vacuun casting mold/Silicon mold for TPU or rubber material, color part available
Plastic injection mould soft tooling or production mould, can do switch runner at single tool to save tooling investment
Silicone & Rubber parts supply high precision and good appearance custom silicone rubber products
Injection moulding parts ABS, PC, POM, TPU, overmolding parts, can provide painting or logo print service
Advantages Confidentiality Signed NDA documents to ensure all your information discussed be confidential. We will also train the staff with detailed regulations and not showing the staff full data if not necessary.
Initiative
communication
Through many years cooperation with our partners, we are confident to provide you satisfied quality with a reasonable price. Not only providing satisfied quality and on-time delivery, but we also have a dedicated and initiative staff for every issue happened in the process.
Efficient service For some urgent issues, we provide 7*24 hours for timely feedback.We will reply your mail within 12 hours or earlier since our team members are energetic and all using smartphone devices.Please add our or for better communication
Advantage in price We are also happy to follow up your other projects which need outsourcing service, what we think is to save your plant visit cost and transportation cost etc. Our team’s goal is to work hard to find out the best price with good quality products for our
customers and achieve more trust and confidence on both sides

Packaging & Shipping

 

Delivery Method: Payment Terms: Warranty Period:
Sample by Express Courier, such as DHL, Fedex,UPS, TNT, EMS etc.; Bulk Order by Air, by Load or by Sea; We accept TT, western union, paypal, moneygram, Escrow , (if you prefer other ways ,pls let us know) We cherish every cooperation chance, and treat customer as friend. Production quality will always be same with sample test. For defected goods, we will re-produce and ship out for replacement

Company Profile

 

Why Choose Us

 

FAQ

Q1:What is your business scope?
A1: Our factory provides silicone rubber parts, CNC plastic prototype, Plastic injection mould, moulding production, logo print and color painting.

Q2:Can you help to share an idea for a new product?
A2: Yes. We are always happy to cooperate with potential customers to evaluate the technical feasibility. Like, choose the right material, optimized the design, DFM report, and building cost etc.

Q3:Are you a trade company or manufacturer?
A3: We are a manufacturer with more than 20 years of experience in custom silicone rubber parts.

Q4:Which country do you frequently work with?
A4: Our customer groups mainly from USA, Canada, Mexico, Australia, Japan, Singapore, India, Israel etc.

Q5:How to have my components quoted?
A5: Please share us your drawings with 3D format (.STEP or .IGES files) and detailed BOM sheet. We are pleased to CZPT the NDA with your company.

 

Q6:What is your MOQ?

A6:MOQ depends on our client’s needs, we can make samples for your priliminary test before final order.

 

Q7:What is the lead time?
A7:It depends on order quantity and design complexity, usually 7-20 days after order confirmation, and then share production video before shipment.

 

 

Usage: Agricultural, Industrial, Medical, Vehicle, Electronic, Household
Material: Silicone Rubber
Mould Life: 500K~1000K Shots
Item: Plastic Injection Mould Manufacturer
Transport Package: Customization
Specification: Customization
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Injection molded partt

Designing Injection Molded Parts

Injection molded parts are a great way to produce fast, reliable parts without having to spend much time on post-processing. Whether you’re designing a small component or a large vehicle, you can expect your parts to be ready to use right away. Because of their high-speed production cycles, you can expect your parts to be delivered within 30 to 90 seconds.

Design considerations for injection molded parts

When developing a medical device, there are several design considerations to be made to create a quality injection molded part. Typically, product designers want to minimize the amount of material needed to fill the part while still maintaining the structural integrity of the product. To this end, injection molded parts often have ribs to stiffen the relatively thin walls. However, improper placement of ribs or projections can create molding problems.
Design considerations for injection molded parts include the overall shape and finish of the part. There are several ways to make the part look better. One way is to make the surface smoother and less pronounced. This will help the material flow evenly throughout the mold and minimize the risk of parting lines. Another way to reduce the risk of sink marks is to reduce the thickness of ribs relative to the nominal wall thickness of the part.
A common problem encountered when designing injection molded parts is sink marks. These can be difficult to avoid. A molder may not be willing to guarantee the product’s surface is sink-free, so designers must make sure that sink marks are minimized. To prevent these problems, the design of the parts should be as simple as possible.
Injection molded parts can also have complex geometries, and the design process is incredibly flexible. A good molder will be able to reproduce complex parts at low cost. To get the best possible results, designers should discuss the design and process with the molder. They should also discuss with the molder any critical tolerance specifications. The designer should also consider reworking the mold if necessary.
The wall thickness of a plastic injection molded part should be consistent. This is important because it influences the part’s functionality and performance. An uneven wall thickness can result in sink marks, voids, and other undesirable effects. It may also result in excessive plastic pressure or cause air traps.

Materials used in injection molded parts

When designing a product, materials used in injection molding are an important factor in the end result. These materials vary in strength, reusability, and cost. Understanding these differences is essential for ensuring the best product. In addition, understanding the characteristics of these materials can help you plan your budget and determine which ones are right for your application.
Choosing the wrong material can have serious consequences. In addition to premature component failure, the wrong choice can also increase your cost. To avoid such an occurrence, it’s a good idea to seek expert advice. Expert consultations can help you understand the factors that are important for your particular plastic molding project.
Fortron PPS: This thermoplastic resin offers excellent strength, toughness, and chemical resistance. It’s also stiff and durable, which makes it ideal for demanding industrial applications. Other common plastics include Nylon 6/6, which is strong and lightweight. Its high melting point makes it a great replacement for metal in certain environments. It also offers desirable chemical and electrical properties. PEEK is another common material used in injection molding.
ABS: Another engineering grade thermoplastic, ABS offers excellent heat resistance and chemical resistance. The disadvantage of ABS is its oil-based composition. As a result, ABS production creates noxious fumes. Nylon is another popular plastic for injection molding. Nylon is used in many different applications, from electrical applications to various kinds of apparel.
Injection moulding is a process where raw material is injected through a mold under high pressure. The mold then shapes the polymer into a desired shape. These moulds can have one or multiple cavities. This enables manufacturers to create different geometries of parts using a single mould. Most injection moulds are made from tool steel, but stainless steel and aluminium are also used for certain applications.

Characteristics of injection molded parts

Injection molded parttInjection molded parts exhibit a range of mechanical and physical properties. These properties affect the performance of the parts. For example, they can affect electrical conductivity. Also, the degree of filling in the parts can determine their mechanical properties. Some studies have even found that filling content can affect the dimensional accuracy of the parts.
To ensure the highest quality of the molded parts, it is important to inspect the machines and processes used to manufacture them. Proper maintenance can prevent mistakes and prolong the service life of the components. Moreover, it is essential to clean and lubricate the machine and its components. This will also reduce the possibility of mold errors.
The temperature and pressure characteristics of the injection mold can be characterized with the help of a simulation tool. For example, in a simulation environment, the injection pressure can be set as a profile and is equal to the pressure in the flow front. Moreover, the maximum injection pressure can be set as a value with minimum dependence on the flow rate. The temperature of the material used in the injection mold should be within a recommended range.
The temperature and pressure of the mold cavity must be monitored to ensure proper ejection. The temperature of the injection mold cavity is usually set at a temperature slightly above the ejection temperature. This can be manually or automatically. If the temperature is too high, the part will not be able to eject. The rapid temperature change can cause the part to warp. The same applies to the cooling time of the mold and cavity.
The thickness of the molded part should be uniform. If the injection mold does not conform to the required thickness, sink marks may be visible. A minimum of 2.5 mm between the outer and inner diameters is required for proper ejection.

Common problems encountered

There are several common problems encountered during the production of injection-molded parts. One of the most common of these is sink marks. These appear on the surface of the part and are a result of uneven cooling of the plastic within the mold. This problem can be caused by poor mold design, insufficient cooling time, and/or low injection pressure.
The first common problem occurs when the mold is not tightly clamped. This causes the molten plastic to be forced out of the mold. Other problems may occur due to the wrong clamping pressure or temperature. In these cases, the clamping force should be increased or the mold design should be revised to allow the plastic to flow properly through it. In addition, a poor quality mold may cause flash or burrs.
Another common problem is wavy patterning. These two defects can affect the appearance and functionality of the part. To avoid these problems, work with an experienced injection molding manufacturer who has experience in these types of parts. They will be able to troubleshoot and minimize any potential risks.
One of the most common problems encountered in injection molding is discoloration. A discolored part will be black or rust-colored. This problem is caused by an excess of air in the mold cavity, and can be avoided by reducing the injection speed. Ventilation systems can also be adjusted to minimize the chances of these problems.
Defective molds can cause a negative impact on the bottom line. By understanding the common problems encountered during injection molding, you can better avoid these problems and make your products as attractive as possible.

Fasteners used in injection molded parts

Injection molded parttInjection molded parts often use fasteners for securing fastener elements in place. As shown in FIGS. 7 and 8 (two separate views), the fastener elements are integrated with the molded product, and they extend from one side. The fastener elements are designed to engage loop elements in the overlying layer. The palm-tree shaped fasteners are especially well-suited for this purpose, as their three-dimensional sides engage more loops than flat sides. These features result in a more secure closure.
When fasteners are used in injection molded parts, the plastic is injected into a mold, with the fastener integrated. In addition to self-tapping screws, other plastic fasteners can include moulded or pre-drilled pilot holes. This method avoids the need for a secondary assembly step and ensures an easy fit. These screws also have other advantages, including a smaller thread profile and lower radial stress, which prevents boss damage.
Another type of fastener commonly used in injection molded parts is a boss. This type of fastener is typically larger than the nut and the pilot hole. An undersized boss can lead to warpage during the injection molding process and cause a product to fail in the field.
Another type of fastener used in injection molded parts is a thread insert, which is usually a stainless steel A2 wire. There are different versions of this fastener for different materials, including carbon fiber reinforced plastic. And the fastener can be modified to adjust the size of the hole.
These fasteners are used in many different types of injection molded parts. Some parts are used to fix a variety of cosmetic issues, such as minor sinks. While these are not defects, they may not look perfect, and they can affect the overall appearance of a product. If you want to improve the appearance of an injection molded part, you can add fibers and glass fibers, as well as colorants.
China manufacturer Factory Direct China Power Coating Mould CZPT Parts Manufacturers   with Hot selling		China manufacturer Factory Direct China Power Coating Mould CZPT Parts Manufacturers   with Hot selling
editor by CX 2023-06-02