China Manufacture EPDM / NBR/ FKM / Nr Automotive Molded Rubber Parts for King Long Bus injection molded parts cost

Merchandise Description

*Merchandise Description :

one. Material:  NR, NBR, SBR, EPDM, FKM, SIL, and many others.

2. Hardness:  fifty Diploma shore A

3. Dimensions:    ninety five *6 mm

4. Colour:   Clear ,purple ,black

5. Temperature resistance:   In between -40~+260 ° C

6. Shade :  Various in colors  are offered

7. Measurements Tolerance :  +/-.005mm – +/-.3mm

8. Functionality:   Good sealing, water and oil resistance, anti-getting older and insulation

nine. Programs:   Used in faucets, bogs, fitting, pipes, showers , automobile areas

ten. Quantity Certificate :  ISO9001:2000 ,ROHS,Achieve,Food and drug administration,SGS

Characteristics:

1. Higher temperature resistance

2. Oil resistance

3. Low temperature resistance

four. CZPT evidence

five. Large pressure resistance

six. Acid resistance

Payment and Shipping and delivery :
 
1. Payment phrases: Financial institution TT, Paypal, West union
two. Delivery way: Via Air , by sea or by FedEx/DHL/TNT/UPS
 
 

Content NBR, HNBR, FKM(FPM or Viton), Silicone,EPDM,CR, NR, SBR, ACM, etc.
Size Layout and dimensions very same as OE portion
Area Stunning searching to OE common
Package deal A:Interior plasitc bag+ outer neutral carton  
B:Inner neutral box+ outer carton 
C:Personalized packing
Delivery A: 3-7days if have stock  
B: If not inventory,fifteen-25days for LCL shipment,25-40days for container cargo
 
Guarantee one hundred% examine goods ahead of delivery
Payment A:30% deposit and equilibrium spend towards BL copy    
B: TT,L/C,Western union
Certification All the goods are create underneath ISO system
Sea Port HangZhou, ZheJiang ,China
Provider one.OEM service: Can develop item according to your sample or drawings 
two.Style catalogue as for every clients’ request to help you create new market place
3.Customized packing with logo  
4. Organize shipment to your warehouse
 

*Materials Inspection :

Our raw materials are all import from overseas, like  Momentive, Wacker,ShinEtsu, Dow-Corning.
The raw materials good quality is crucial for best high quality solution.
 

*Injection Moulding :

The machine we personal 10 sets which are all vertical equipment, which can produce all non-normal parts.
 

*Approach inspection one hundred% :

We have almost a hundred persons to manage the high quality of components. Each part will be inspected 100%.
Make positive no 1 faulty great go out from the manufacturing facility.

Our company’s strength :

1.  All content are of RoHS and Attain authorized

two.  Precision Own Mold-Making Technology 

three.  A manufacturer with Mold-Making Plant, Silicone Compression Plant,Assembly Plant

4.  Production and Test strictly according to ISO9001

5.  Experienced Designers and Engineers

six.  Test Equipment: 3D Projectors, Elasticity Measurement, Durometer etc
 
7.   Qualifications of OEM provider for PHILIPS, FOXCONN

8.   Capacity to take care of many tiny to MID- size tasks

nine.   Rapid Reaction Organization: Support client within short time
 

Packing :

one Personal computer / Blister Card , 500 pcs / carton
Carton Measurement :forty x thirty x 35

Quickly Quotation Demands:
 

one. Offering 2nd/3D style drawings, Samples or other standard data
two. Materilas Needs:
3. Sizes Tolerance Demands:
4. Hardness Needs: 
5. Color Demands
six. Mold Life Calls for, Mold Metal Needs
seven. Surface Needs
eight. Order Amount

OEM/ODM Provider:

one. Quickly Quotation Calls for: 2D/3D styles Drawings, Samples, or other simple info

two.  Materials Requires: LSR(Liquid Silicone Rubber) Silicone Rubber:NBR, SBR, EPDM, HNBR, TPU,
    PTV,  NR, CR, Silicone and so on.

3.  Materials Hardness: fifteen Shore A – 90 Shore

4.  Sizes Tolerance: +/-.005mm – +/-.3mm

5.  Spercial demands: like Surface, Coloration, Anti-Fire/Dust/Water, Operating Temperature, CZPT NDA and many others,
     Pls come to feel free to converse

Unique Needs: 

1)  IP grade (dust/drinking water evidence grade, 3M gumming tape)

2)  Anti-Hearth grade (flame retardant)(UL94 VO), 

three)  Medical/foods specifications(Food and drug administration PTFE), (If truly require up to totally foods/health care regular, the greatest    choose LSR)
4)  SGS studies and so on.

 

Material: EPDM
Application: Auto Parts
Type: Dust Seal
Performance: High Pressure
Shape: Rectangle Ring
Standard: Standard, Nonstandard

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material NBR, HNBR, FKM(FPM or Viton), Silicone,EPDM,CR, NR, SBR, ACM, etc.
Size Design and size same as OE part
Surface Beautiful looking to OE standard
Package A:Inner plasitc bag+ outer neutral carton  
B:Inner neutral box+ outer carton 
C:Customized packing
Delivery A: 3-7days if have stock  
B: If not stock,15-25days for LCL shipment,25-40days for container shipment

 
Warranty 100% inspect products before delivery
Payment A:30% deposit and balance pay against BL copy    
B: TT,L/C,Western union
Certificate All the products are produce under ISO system
Sea Port Xiamen, Fujian ,China
Service 1.OEM service: Can develop product according to your sample or drawings 
2.Design catalogue as per clients’ request to help you develop new market
3.Customized packing with logo  

4. Arrange shipment to your warehouse

 

###

1. Offering 2D/3D design drawings, Samples or other basic information
2. Materilas Demands:
3. Sizes Tolerance Demands:
4. Hardness Demands: 
5. Color Demands
6. Mold Life Demands, Mold Steel Demands
7. Surface Demands
8. Order Quantity
Material: EPDM
Application: Auto Parts
Type: Dust Seal
Performance: High Pressure
Shape: Rectangle Ring
Standard: Standard, Nonstandard

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material NBR, HNBR, FKM(FPM or Viton), Silicone,EPDM,CR, NR, SBR, ACM, etc.
Size Design and size same as OE part
Surface Beautiful looking to OE standard
Package A:Inner plasitc bag+ outer neutral carton  
B:Inner neutral box+ outer carton 
C:Customized packing
Delivery A: 3-7days if have stock  
B: If not stock,15-25days for LCL shipment,25-40days for container shipment

 
Warranty 100% inspect products before delivery
Payment A:30% deposit and balance pay against BL copy    
B: TT,L/C,Western union
Certificate All the products are produce under ISO system
Sea Port Xiamen, Fujian ,China
Service 1.OEM service: Can develop product according to your sample or drawings 
2.Design catalogue as per clients’ request to help you develop new market
3.Customized packing with logo  

4. Arrange shipment to your warehouse

 

###

1. Offering 2D/3D design drawings, Samples or other basic information
2. Materilas Demands:
3. Sizes Tolerance Demands:
4. Hardness Demands: 
5. Color Demands
6. Mold Life Demands, Mold Steel Demands
7. Surface Demands
8. Order Quantity

Designing Injection Molded Parts

Injection molded parts are designed to work together to form a whole. While the small plastic toys like Legos aren’t typically fabricated for assembly, these products still require precision measurements. For this reason, the designs of injection molded parts should be perfected for manufacturing. The designs should also minimize error potential.

Design considerations for injection molded parts

Injection molded parttWhen designing injection molded parts, it’s essential to consider the wall thickness of the part. Ideally, the wall thickness is uniform across the entire part. This allows the entire mold cavity to fill without restriction, and reduces the risk of defects. Parts that don’t have uniform wall thickness will have high stresses at the boundary between two sections, increasing the risk of cracks, warping, and twisting. To avoid such stresses, designers can consider tapering or rounding the edges of the part to eliminate stress concentration.
The wall thickness of the injection molded part is important because it affects many key characteristics. Therefore, it is critical to take proper care in choosing the wall thickness to avoid costly delays caused by mold problems or mold modification. The nominal wall thickness should be determined based on the function and stress requirements of the part. Similarly, the minimum wall thickness should be calculated based on acceptable stress. Too thin a wall can result in air traps and excessive plastic pressure.
Injection molded parts that have sharp corners are a common cause of defects. Sharp corners create stress concentrations, poor flow patterns, and increased injection mold wear. To minimize these problems, designers should keep inside corners and outside corners at half the wall thickness. This will help minimize stress and ensure the integrity of the part.
Another important design consideration for injection molded parts is the thickness of the ribs. They should be at least two-thirds of the outer wall. Thicker ribs may result in sink marks on the outer surface. Undercuts also complicate the mold design and increase the cost of the part.
Tolerance variation is also an important consideration. It depends on materials, process control, and tool design. Tolerance variation varies from molder to molder, and designers should discuss critical tolerance requirements with molders. If the part has to be manufactured to a particular tolerance, designers should consider options for mold revisions to minimize the tolerance variance. Additionally, designers may need to intentionally design extra clearance. To compensate for such variation, the molder may remove some steel or modify the design. In some cases, interference can be solved by welding.
Design considerations for injection molded parts should be discussed with material science professionals early in the design process. This is critical because changes to the mold design can be costly. Therefore, achieving the best possible result is critical. By following design guidelines, manufacturers can avoid common defects. A uniform wall thickness is also important because non-uniform thickness can lead to warping the part as it cools.
Another important factor for injection molded parts is the flowability of the material in the mold cavity. The resin should be able to flow easily around rounded corners. For example, a molded part with a curved undercut will not eject properly from the mold if there’s no space between the two sides. For this reason, designers should consider the flowability of the molded material before deciding on a design.

Adding a runner system to an injection molding machine

Injection molded parttThere are two main types of runner systems: hot runner systems and cold runner systems. In a hot runner system, a runner nozzle delivers the molten plastic into the mold cavity. A cold runner system does not require the use of a nozzle and acts as a conduit for the molten plastic.
The design of a hot runner mold should balance the activity of plastic solution and mold cavities. Ideally, a mold with two cavities is better balanced than one with three. However, it is important to remember that a three-cavity mold requires a manifold balance of human activities.
Plastic mold runner systems are crucial for ensuring consistent fill rates and pressure. Whether you are producing single or multiple-cavity plastic parts, a runner system will keep your processes consistent. When choosing a runner system, make sure you have the right one for your application.
Hot runner systems can reduce cycle times by as much as 10 to 30 percent. They help improve quality control and minimize material waste by keeping the plastic molten throughout the molding process. Moreover, they help save on plastic raw materials and energy. These features make them ideal for large production lines.
A hot runner system can also help prevent overfilling a cavity. Make sure that the volume of the hot runner is equal to the volume of the mold cavity. Otherwise, the plastic solution will be trapped inside the hot runner for too long and decompose.
Hot runner systems come in many varieties. One type of hot runner system is called the sprue hot runner system. This system uses a mechanical valve to open and close a nozzle. This type of hot runner is more effective and efficient than a general-purpose hot runner. However, it is also more expensive.
In a three-plate mold, the runner system is positioned between the core and cavity plates. When the mold is opened, the runner system automatically separates from the molded part. This eliminates the need for manual labor, but increases the cost of tooling.
The runner system is important for producing parts that are both thin and thick. The runner should be narrow but large so as not to create voids and improve the overall performance of the final product. Runner systems are also important for reducing the amount of energy needed to form and regrind the material.
A hot runner system is one way to improve the speed and accuracy of plastic molding. It helps avoid problems with waste by reducing the amount of plastic wasted. Furthermore, a hot runner system also prevents expensive repairs. By adding a runner system to an injection molding system, you will ensure better quality and precision, and avoid unnecessary downtime and costly repairs.
Hot runner systems are ideal for high-volume productions. However, they require a higher level of maintenance. In addition, hot runner systems are difficult to clean and often leave waste material. Hidden runners may also be inconvenient to remove, especially when changing materials or colors. They can also lead to sticking issues if they are made from thermally sensitive materials.

Using a thermally isolated cold injection unit

Injection molded parttThermostatic control of temperature in an injection molding process can make a significant impact on part quality. High mold temperatures should be regulated by using a temperature-controlled cooling unit. These devices are equipped with pumping systems and internal heaters. The temperature of the injected plastic determines the plastic’s flow characteristics and shrinkage. Temperature also influences the surface finish, dimensional stability, and physical properties of the finished product.
A thermally isolated cold injection unit allows mold operators to mold parts at lower temperatures than a conventional injection molding machine. The injection mold itself is composed of two steel halves. The two halves are connected by a mechanical hinge. During injection molding, a small amount of plastic is forced into the mold cavity. The injected plastic is then allowed to cool into a solid state. The molded part then falls out of the mold halves. The injected part then enters a bin to be collected.
The heat/cool injection molding process can improve the aesthetics of molded parts significantly. The effects of this technique are particularly apparent with amorphous resins, which do not form a skin during the injection phase. The molded parts have a higher gloss than with conventional molding techniques.
This process requires less clamping force than conventional injection molding and offers more design freedom. It also increases process capacity and materials savings. The process control for this process is more complex, with variables such as the amount of melt injection, water pressure, and water injection delay time.
The angle of repose is another criterion. A low angle indicates that the pellets are free-flowing, while an angle above 45deg indicates that the pellets are not free-flowing. This is important when processing nylon resins.
Plastic injection molding has made huge advances in recent decades. Today, most injection molds fall into one of two types: hot runner and cold runner. Each has its advantages and disadvantages. Understanding how they differ will help you decide which method is right for you.
Injection molding is a highly effective manufacturing process that gives manufacturers a competitive edge over their competition. Using this process produces high-quality plastic and metal parts with minimal waste and a low cycle time. The process is also extremely accurate and produces products with the perfect blend of flexibility and strength.
China Manufacture EPDM / NBR/ FKM / Nr Automotive Molded Rubber Parts for King Long Bus     injection molded parts costChina Manufacture EPDM / NBR/ FKM / Nr Automotive Molded Rubber Parts for King Long Bus     injection molded parts cost
editor by czh 2023-04-03